您好，请问之前sample一直可以编译成功，但是这两天编译突然报错，显示找不到-lascencl 和-lacl_dvpp，用find可以找到对应的文件，然后检查CMakeLists文件里面include路径也没问题，现有的帖子没法都试过没法解决。find / -name libascendcl.so结果如下：CMakeList如下：

环境说明: 开发环境和运行环境在鲲鹏920服务器上(1) 在物理机上运行出现acl init failed ret=100039:执行source /usr/local/Ascend/ascend-toolkit/set_env.sh后，运行正常(2)在容器上始终出现错误，不知道是什么原因, 求助一下编译运行环境: infer-modelzoo镜像 版本 22.0.RC3运行图像分类样例：按下面的网址就行操作https://www.hiascend.com/document/detail/zh/quick-installation/22.0.RC3/quickinstg/500_Pro_3000/quickinstg_500_Pro_3000_0018.html运行 samples/cplusplus/level2_simple_inference/1_classification/resnet50_imagenet_classification出现错误:   执行source /usr/local/Ascend/ascend-toolkit/set_env.sh还是100039错误，    按物理机方式重新安装安装Toolkit（开发套件），还是100039错误，启动docker 命令有问题?docker run -it -u root \--device=/dev/davinci0 \--device=/dev/davinci_manager \--device=/dev/devmm_svm \--device=/dev/hisi_hdc \-v /usr/local/Ascend/driver:/usr/local/Ascend/driver \-v /data:/data \ascendhub.huawei.com/public-ascendhub/infer-modelzoo:22.0.RC3\/bin/bash请帮忙指点一下！！

如图1所示，我通过ATC命令将.pb模型成功转为.om模型后，在推理时，却出现了Input size不一样，如图2所示。‘图1图2

目前我希望在Atlas 200 DK上完成图像识别的计算任务，于是我做了以下几个步骤：1.我通过Tensorflow2.10.0针对MNIST训练1个CNN模型 M(.h5);2.然后将M(.h5)转化为Atlas200dk能识别的Frozen_M(.pb);3.在Atlas 200 Dk上用ACT对Frozen_M转化为npu_M(.om)格式后，用ACL调用.om文件进行推理测试，测试得出推理速度NPU_speed;4.在Atlas 200 Dk直接用tensorflow加载M(.h5),用CPU进行推理测试，测试得出推理速度CPU_speed;最终测试结果发现，这个NPU_speed和CPU_speed不仅差不了多少甚至更差，如图1所示；其中在用npu_M(.om)进行推理时，npu的使用情况如图2所示；网上分享Atlas 200DK在通过YOLO处理目标检测时，npu对比cpu的推理速度20-300倍，但是在用CNN处理图像识别时，却没法展现性能么？图1：上面方框为NPU_speed,下面方框是CPU_speed.图2：NPU的内存消耗与核数占用.

Atlas 200 dk 是否有图形界面，或者需要配置什么才能有图形界面

之前已用atlas 200dk跑过样例,也了解了一些,现在自己写了一个最简单的分类模型(识别猫和狗),然后在.onnx转.om的过程中报错现在想请教如下几个问题(1)请问报错是什么原因错了,因为我也是模仿例程里面的转化命令去转化的(2)华为有没有关于这种文件相关信息的讲解,这个文件是自己写的还是可以直接内部转换的

新手上路，在atlas 200dk上安装了合设环境，然后安装了mindspore1.6， 验证案例已经成功跑通然后，我想要把PC机上的mindspore模型移植到atlas 200dk上推理通过查阅文档，发现可以使用mindspore_server进行（不确定可不可行，因为现在报错了）然后我开始跑官网的案例https://www.mindspore.cn/serving/docs/zh-CN/r1.6/serving_example.html然后报错了这个是为什么呢我的tensor_add.mindir是PC机（x86_64）mindspore1.6.2版本导出来的, atlas上为了和mindspore_server保持版本一致用了1.6.0,不知道有没有关系把mindir也附上

【功能模块】Atlas 200 DK套件【操作步骤&问题现象】目的：通过USB网卡制卡EMMC步骤：通过USB线连接PC机和ATLAS200模块，上电ATLAS200模块，在PC机windows的设备管理器的“其他设备”中出现“HI1910”设备，因为此时该设备无驱动，无法进行下一步；问题：我看文档中，设备管理器为RNDIS，而我的显示HI1910，无法安装为网络适配器驱动，请问如何解决

https://bbs.huaweicloud.com/forum/thread-103951-1-1.html最近遇到了上述链接相似的问题，坛友们有遇到这种问题的吗，困扰好长时间了，一直没解决▒456000002325152707178e005e00680cur[2], last[62].cur[3], last[62].0.5c-init ok[NVE]current_id = 0,nve_age = 0,age = 0[NVE]current_id = 0 number of nvbin = 24, version = 0[NVE]nve_offser = 0x38a0 nve_valid_items = 22cur[4], last[62].▒mode 3, efuse:261!cpu pll recfg function,success---203549!cur[5], last[62].cur[6], last[62].cur[7], last[62].current[2].current[3].Ddr_freq->ddr_freq 1600 !uc sector[0] valid flag not enabled!uc sector[1] valid flag not enabled![UC]ddr_iecc_en:0current[21].current[22].current[23].current[25].current[26].current[31].freq 60 vol 2:current[33].Density:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffch_mask: 0xffch_lr: 0x3ch_num: 0x8rank_num: 0x1Manufacturer ID[0]:0x13Manufacturer ID[1]:0x13Manufacturer ID[2]:0x13Manufacturer ID[3]:0x13Manufacturer ID[4]:0x13Manufacturer ID[5]:0x13Manufacturer ID[6]:0x13Manufacturer ID[7]:0x13Total size:0x8DDR info:0x813DDR_TYPE_8CH_ALL 1_rank 8G !DDR HHA interleave enabled!idx: 0 start_addr_l: 0x0 start_addr_h: 0x0 length: 0x800idx: 1 start_addr_l: 0x80000000 start_addr_h: 0x8 length: 0x1800current[34].uce init entryuce profile total is 0x32cuce init endcurrent[35].freq 400 vol 2:freq 1600 vol 2:HVrefThres:8current[36].uce init entryuce profile total is 0x298uce init endcurrent[40].transfer ddr data to l2_buf 0x40000000.current[51].current[52].current[54].current[55].current[52].current[58].current[59].current[60].current[62].addr = d00c2030, value = 0addr = d00c3580, value = 0addr = d00c6320, value = 0addr = b0070e00, value = 0addr = d00c0a28, value = 0addr = b0070e30, value = 0addr = d00c0a58, value = 0addr = b0070e18, value = 0addr = d00c0a40, value = 0addr = b0072000, value = 3addr = d00c2540, value = 30addr = d00c00a0, value = 3faddr = d00c00a4, value = 3faddr = d00c0030, value = 241f41addr = d00c0034, value = 0addr = d00c0038, value = 241f41addr = d00c003c, value = 0addr = d00c5000, value = 3faddr = b0072004, value = 0addr = d00c2550, value = 0addr = d00c3690, value = 82current[63].DDR Total Capacity: 8192 MB.DDR Rank Type: single.DDR Channel with DRAM: A B C D E F G HDDR Init 1014 mscurrent[65].current[71].cur[8], last[62].cp_area_l2buf_2_ddr:541maintain:0, static:50cur[9], last[62].[STID]adcin7:0x6f7.[STID]adcin7_remap:0x9.[STID]adcin8:0x6f7.[STID]adcin8_remap:0x9.cur[10], last[62].SPI FLASH download uefi.cur[25], last[62].cur[26], last[62].SPI FLASH download uefi finish.sicur[34], last[62].ns, succur[35], last[62].si succur[36], last[62].s vr bgns vr, sccur[37], last[62].sv sucsv suchigh mntn_config=0xa0000000, low mntn_config=0x0high addr=0x8, low addr=0x90000000lpm3 will WFEdisreset A55.cur[62], last[62].aicore_power_on:312----core1 step1aicore_pmu_up:233----repair step 5_aicore0_buck_on:167---state -0xf--cfg:0x64--buck voltage:0x64_aicore1_buck_on:225---state -0xf--cfg:0x64--buck voltage:0x64_aimemory0_1_buck_on:196---state -0xf--cfg:0x64--buck voltage:0x64aicore_pmu_up:257----pmu up step1aicore0_power_reset:74aicore0_power_reset:83aicore1_power_reset:88aicore1_power_reset:97aicore1_isolation_enable:112----repair step 4aicore_power_on:331----power on success.DDR HHA interleave edumnp static ddr 0x0@0x0dump static ddr 0x0@0x0dump static ddr 0x0@0x0NOTICE: Booting Trusted FirmwareNOTICE: BL1 TFNOTICE: BL1: Booting BL2NOTICE: BL2 TFNOTICE: BL1: Booting BL31

上图为make_ubuntu_sd.log 日志截图。望各位大佬帮忙看看，困扰孩子好几天了

模块制卡成功后第一次上电开机意外掉电（在输入用户名进行ssh登录阶段），之后便一直无法正常启动，日志如下：有人说是内部flash文件损坏，如果是flash损坏的话，自己需要怎么操作才可以修复呢，日志有没有指出是具体什么问题呢▒456000002325152707178e005e00680pmu second pmu initial:0x3.cur[2], last[0].cur[3], last[0].0.5c-init ok[NVE]current_id = 0,nve_age = 0,age = 0[NVE]current_id = 0 number of nvbin = 24, version = 0[NVE]nve_offser = 0x38a0 nve_valid_items = 22cur[4], last[0].cpu mo▒b*▒▒͕▒261!cpu pll recfg function,success---208736!cur[5], last[0].cur[6], last[0].cur[7], last[0].current[2].current[3].Ddr_freq->ddr_freq 1600 !uc sector[0] valid flag not enabled!uc sector[1] valid flag not enabled![UC]ddr_iecc_en:0current[21].current[22].current[23].current[25].current[26].current[31].freq 60 vol 2:current[33].Density:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0x100010Density:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffDensity:0xffffffffch_mask: 0xffch_lr: 0x3ch_num: 0x8rank_num: 0x1Manufacturer ID[0]:0x13Manufacturer ID[1]:0x13Manufacturer ID[2]:0x13Manufacturer ID[3]:0x13Manufacturer ID[4]:0x13Manufacturer ID[5]:0x13Manufacturer ID[6]:0x13Manufacturer ID[7]:0x13Total size:0x8DDR info:0x813DDR_TYPE_8CH_ALL 1_rank 8G !DDR HHA interleave enabled!idx: 0 start_addr_l: 0x0 start_addr_h: 0x0 length: 0x800idx: 1 start_addr_l: 0x80000000 start_addr_h: 0x8 length: 0x1800current[34].uce init entryuce profile total is 0x32cuce init endcurrent[35].freq 400 vol 2:freq 1600 vol 2:HVrefThres:8current[36].uce init entryuce profile total is 0x298uce init endcurrent[40].transfer ddr data to l2_buf 0x40000000.current[51].current[52].current[54].current[55].current[52].current[58].current[59].current[60].current[62].addr = d00c2030, value = 0addr = d00c3580, value = 0addr = d00c6320, value = 0addr = b0070e00, value = 0addr = d00c0a28, value = 0addr = b0070e30, value = 0addr = d00c0a58, value = 0addr = b0070e18, value = 0addr = d00c0a40, value = 0addr = b0072000, value = 3addr = d00c2540, value = 30addr = d00c00a0, value = 3faddr = d00c00a4, value = 3faddr = d00c0030, value = 241f41addr = d00c0034, value = 0addr = d00c0038, value = 241f41addr = d00c003c, value = 0addr = d00c5000, value = 3faddr = b0072004, value = 0addr = d00c2550, value = 0addr = d00c3690, value = 82current[63].DDR Total Capacity: 8192 MB.DDR Rank Type: single.DDR Channel with DRAM: A B C D E F G HDDR Init 1014 mscurrent[65].current[67].cur[8], last[0].maintain:0, static:0cur[9], last[0].[STID]adcin7:0x6f7.[STID]adcin7_remap:0x9.[STID]adcin8:0x6f7.[STID]adcin8_remap:0x9.cur[10], last[0].SPI FLASH download uefi.cur[25], last[0].cur[26], last[0].SPI FLASH download uefi finish.sicur[34], last[0].ns, succur[35], last[0].si succur[36], last[0].s vr bgns vr, sccur[37], last[0].sv sucsv suchigh mntn_config=0xa0000000, low mntn_config=0x0high addr=0x8, low addr=0x90000000lpm3 will WFEdisreset A55.cur[0], last[0].aicore_power_on:312----core1 step1aicore_pmu_up:233----repair step 5_aicore0_buck_on:167---state -0x7--cfg:0x64--buck voltage:0x64_aicore1_buck_on:225---state -0xf--cfg:0x64--buck voltage:0x64_aimemory0_1_buck_on:196---state -0xf--cfg:0x64--buck voltage:0x64aicore_pmu_up:257----pmu up step1aicore0_power_reset:74aicore0_power_reset:83aicore1_power_reset:88aicore1_power_reset:97aicore1_isolation_enable:112----repair step 4aicore_power_on:331----power on success.DDR HHA interleave edunmp static ddr 0x0@0x0dump static ddr 0x0@0x0dump static ddr 0x0@0x0NOTICE: Booting Trusted FirmwareNOTICE: BL1 TFNOTICE: BL1: Booting BL2NOTICE: BL2 TFNOTICE: BL1: Booting BL31

制卡成功后通过串口日志看到了进入OS的日志信息，然后就手动直接断电了（没输入密码进行登录），再次上电后就是下面的日志了，之后就一直是这个日志进不去系统了 ▒4 5 6 00000232 51 52 70 71 78 e005e006 80 pmu second pmu initial:0x3. cur[2], last[0]. cur[3], last[0]. 0.5 c-init ok [NVE]current_id = 0,nve_age = 0,age = 0 [NVE]current_id = 0 number of nvbin = 24, version = 0 [NVE]nve_offser = 0x38a0 nve_valid_items = 22 cur[4], last[0]. cpu mo▒b*▒▒͕▒261! cpu pll recfg function,success---208736! cur[5], last[0]. cur[6], last[0]. cur[7], last[0]. current[2]. current[3]. Ddr_freq->ddr_freq  1600 ! uc sector[0] valid flag not enabled! uc sector[1] valid flag not enabled! [UC]ddr_iecc_en:0 current[21]. current[22]. current[23]. current[25]. current[26]. current[31]. freq 60 vol 2: current[33]. Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff ch_mask: 0xff ch_lr: 0x3 ch_num: 0x8 rank_num: 0x1 Manufacturer ID[0]:0x13 Manufacturer ID[1]:0x13 Manufacturer ID[2]:0x13 Manufacturer ID[3]:0x13 Manufacturer ID[4]:0x13 Manufacturer ID[5]:0x13 Manufacturer ID[6]:0x13 Manufacturer ID[7]:0x13 Total size:0x8 DDR info:0x813 DDR_TYPE_8CH_ALL 1_rank 8G ! DDR HHA interleave enabled! idx: 0 start_addr_l: 0x0 start_addr_h: 0x0 length: 0x800 idx: 1 start_addr_l: 0x80000000 start_addr_h: 0x8 length: 0x1800 current[34]. uce init entry uce profile total is 0x32c uce init end current[35]. freq 400 vol 2: freq 1600 vol 2: HVrefThres:8 current[36]. uce init entry uce profile total is 0x298 uce init end current[40]. transfer ddr data to l2_buf 0x40000000. current[51]. current[52]. current[54]. current[55]. current[52]. current[58]. current[59]. current[60]. current[62]. addr = d00c2030, value = 0 addr = d00c3580, value = 0 addr = d00c6320, value = 0 addr = b0070e00, value = 0 addr = d00c0a28, value = 0 addr = b0070e30, value = 0 addr = d00c0a58, value = 0 addr = b0070e18, value = 0 addr = d00c0a40, value = 0 addr = b0072000, value = 3 addr = d00c2540, value = 30 addr = d00c00a0, value = 3f addr = d00c00a4, value = 3f addr = d00c0030, value = 241f41 addr = d00c0034, value = 0 addr = d00c0038, value = 241f41 addr = d00c003c, value = 0 addr = d00c5000, value = 3f addr = b0072004, value = 0 addr = d00c2550, value = 0 addr = d00c3690, value = 82 current[63]. DDR Total Capacity: 8192 MB. DDR Rank Type: single. DDR Channel with DRAM: A B C D E F G H DDR Init 1014 ms current[65]. current[67]. cur[8], last[0]. maintain:0, static:0 cur[9], last[0]. [STID]adcin7:0x6f7. [STID]adcin7_remap:0x9. [STID]adcin8:0x6f7. [STID]adcin8_remap:0x9. cur[10], last[0]. SPI FLASH download uefi. cur[25], last[0]. cur[26], last[0]. SPI FLASH download uefi finish. si cur[34], last[0]. ns, suc cur[35], last[0]. si suc cur[36], last[0]. s vr bg ns vr, sc cur[37], last[0]. sv suc sv suc high mntn_config=0xa0000000, low mntn_config=0x0 high addr=0x8, low addr=0x90000000 lpm3 will WFE disreset A55. cur[0], last[0]. aicore_power_on:312----core1 step1 aicore_pmu_up:233----repair step 5 _aicore0_buck_on:167---state -0x7--cfg:0x64--buck voltage:0x64 _aicore1_buck_on:225---state -0xf--cfg:0x64--buck voltage:0x64 _aimemory0_1_buck_on:196---state -0xf--cfg:0x64--buck voltage:0x64 aicore_pmu_up:257----pmu up step1 aicore0_power_reset:74 aicore0_power_reset:83 aicore1_power_reset:88 aicore1_power_reset:97 aicore1_isolation_enable:112----repair step 4 aicore_power_on:331----power on success. DDR HHA interleave e dump statnic ddr 0x0@0x0  dump static ddr 0x0@0x0  dump static ddr 0x0@0x0 NOTICE:  Booting Trusted Firmware NOTICE:  BL1 TF NOTICE:  BL1: Booting BL2 NOTICE:  BL2 TF NOTICE:  BL1: Booting BL31 4 5 6 00000232 51 52 70 71 78 e005e006 80 cur[2], last[62]. cur[3], last[62]. 0.5 c-init ok [NVE]current_id = 0,nve_age = 0,age = 0 [NVE]current_id = 0 number of nvbin = 24, version = 0 [NVE]nve_offser = 0x38a0 nve_valid_items = 22 cur[4], last[62]. ▒mode 3, efuse:261! cpu pll recfg function,success---203549! cur[5], last[62]. cur[6], last[62]. cur[7], last[62]. current[2]. current[3]. Ddr_freq->ddr_freq  1600 ! uc sector[0] valid flag not enabled! uc sector[1] valid flag not enabled! [UC]ddr_iecc_en:0 current[21]. current[22]. current[23]. current[25]. current[26]. current[31]. freq 60 vol 2: current[33]. Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0x100010 Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff Density:0xffffffff ch_mask: 0xff ch_lr: 0x3 ch_num: 0x8 rank_num: 0x1 Manufacturer ID[0]:0x13 Manufacturer ID[1]:0x13 Manufacturer ID[2]:0x13 Manufacturer ID[3]:0x13 Manufacturer ID[4]:0x13 Manufacturer ID[5]:0x13 Manufacturer ID[6]:0x13 Manufacturer ID[7]:0x13 Total size:0x8 DDR info:0x813 DDR_TYPE_8CH_ALL 1_rank 8G ! DDR HHA interleave enabled! idx: 0 start_addr_l: 0x0 start_addr_h: 0x0 length: 0x800 idx: 1 start_addr_l: 0x80000000 start_addr_h: 0x8 length: 0x1800 current[34]. uce init entry uce profile total is 0x32c uce init end current[35]. freq 400 vol 2: freq 1600 vol 2: HVrefThres:8 current[36]. uce init entry uce profile total is 0x298 uce init end current[40]. transfer ddr data to l2_buf 0x40000000. current[51]. current[52]. current[54]. current[55]. current[52]. current[58]. current[59]. current[60]. current[62]. addr = d00c2030, value = 0 addr = d00c3580, value = 0 addr = d00c6320, value = 0 addr = b0070e00, value = 0 addr = d00c0a28, value = 0 addr = b0070e30, value = 0 addr = d00c0a58, value = 0 addr = b0070e18, value = 0 addr = d00c0a40, value = 0 addr = b0072000, value = 3 addr = d00c2540, value = 30 addr = d00c00a0, value = 3f addr = d00c00a4, value = 3f addr = d00c0030, value = 241f41 addr = d00c0034, value = 0 addr = d00c0038, value = 241f41 addr = d00c003c, value = 0 addr = d00c5000, value = 3f addr = b0072004, value = 0 addr = d00c2550, value = 0 addr = d00c3690, value = 82 current[63]. DDR Total Capacity: 8192 MB. DDR Rank Type: single. DDR Channel with DRAM: A B C D E F G H DDR Init 1014 ms current[65]. current[71]. cur[8], last[62]. cp_area_l2buf_2_ddr:541 maintain:0, static:50 cur[9], last[62]. [STID]adcin7:0x6f7. [STID]adcin7_remap:0x9. [STID]adcin8:0x6f7. [STID]adcin8_remap:0x9. cur[10], last[62]. SPI FLASH download uefi. cur[25], last[62]. cur[26], last[62]. SPI FLASH download uefi finish. si cur[34], last[62]. ns, suc cur[35], last[62]. si suc cur[36], last[62]. s vr bg ns vr, sc cur[37], last[62]. sv suc sv suc high mntn_config=0xa0000000, low mntn_config=0x0 high addr=0x8, low addr=0x90000000 lpm3 will WFE disreset A55. cur[62], last[62]. aicore_power_on:312----core1 step1 aicore_pmu_up:233----repair step 5 _aicore0_buck_on:167---state -0xf--cfg:0x64--buck voltage:0x64 _aicore1_buck_on:225---state -0xf--cfg:0x64--buck voltage:0x64 _aimemory0_1_buck_on:196---state -0xf--cfg:0x64--buck voltage:0x64 aicore_pmu_up:257----pmu up step1 aicore0_power_reset:74 aicore0_power_reset:83 aicore1_power_reset:88 aicore1_power_reset:97 aicore1_isolation_enable:112----repair step 4 aicore_power_on:331----power on success. DDR HHA interleave e dumnp static ddr 0x0@0x0  dump static ddr 0x0@0x0  dump static ddr 0x0@0x0 NOTICE:  Booting Trusted Firmware NOTICE:  BL1 TF NOTICE:  BL1: Booting BL2 NOTICE:  BL2 TF NOTICE:  BL1: Booting BL31  

我用USB连接了200DK和主机，USB虚拟IP配置成了与Atlas 200DK虚拟网卡相同的网段，成功地ssh连接到了开发板。用网线连接了家用的路由器和200DK的网口，并按照昇腾官方文档配置了网络。但是在ping百度时和apt-get update时出现了如下错误：

atlas制卡成功后网口和usb 均无法ping通，无法登录

按照YOLOv5-昇腾社区 (hiascend.com)在Atlas200DK（昇腾310）上部署推理环境，在执行“4.2 mxBase推理”时，缺少/dev/devmm_svm 和/dev/hisi_hdc：因此将docker启动命令改为如下：docker run -it -u root --device=/dev/davinci0 --device=/dev/davinci_manager --device=/dev/davinci_mdio --device=/dev/hi_davinci -v /usr/local/Ascend/driver:/usr/local/Ascend/driver -v /home:/home ascendhub.huawei.com/public-ascendhub/infer-modelzoo:21.0.2 /bin/bash编译及运行报错如下root@55d7658b6652:/home/HwHiAiUser/Yolov5_for_MindSpore_1.1_code/infer/mxbase# bash build.sh ASCEND_HOME is set to /usr/local/Ascend by userSet ASCEND_VERSION to the default value: nnrt/latestARCH_PATTERN is set to the default value: ./-- The C compiler identification is GNU 7.5.0-- The CXX compiler identification is GNU 7.5.0-- Check for working C compiler: /usr/bin/cc-- Check for working C compiler: /usr/bin/cc -- works-- Detecting C compiler ABI info-- Detecting C compiler ABI info - done-- Detecting C compile features-- Detecting C compile features - done-- Check for working CXX compiler: /usr/bin/c++-- Check for working CXX compiler: /usr/bin/c++ -- works-- Detecting CXX compiler ABI info-- Detecting CXX compiler ABI info - done-- Detecting CXX compile features-- Detecting CXX compile features - doneTARGET_LIBRARY:yolov5postprocessor.-- Configuring done-- Generating done-- Build files have been written to: /home/HwHiAiUser/Yolov5_for_MindSpore_1.1_code/infer/mxbase/buildScanning dependencies of target yolov5postprocessor[ 20%] Building CXX object CMakeFiles/yolov5postprocessor.dir/src/PostProcess/Yolov5MindSporePost.cpp.o[ 40%] Linking CXX shared library libyolov5postprocessor.so[ 40%] Built target yolov5postprocessorScanning dependencies of target yolov5[ 60%] Building CXX object CMakeFiles/yolov5.dir/src/main.cpp.o[ 80%] Building CXX object CMakeFiles/yolov5.dir/src/Yolov5Detection.cpp.o[100%] Linking CXX executable yolov5[100%] Built target yolov5make: *** No rule to make target 'install'. Stop.root@55d7658b6652:/home/HwHiAiUser/Yolov5_for_MindSpore_1.1_code/infer/mxbase# ./build/yolov5 --dir ../../data/iamge/[ERROR] DRV(514,yolov5):2022-12-20-09:15:41.286.882 [devdrv_manager.c:100][devmng] [devdrv_open_device_manager 100] open device manager fail,name=/dev/davinci_manager,ret_fd=-1,old_fd=-1,err=2.[ERROR] DRV(514,yolov5):2022-12-20-09:15:41.287.083 [devdrv_info.c:1098][devmng] [dmanage_get_container_flag 1098] open davinci manager failed.[ERROR] DRV(514,yolov5):2022-12-20-09:15:41.287.148 [devdrv_manager.c:2027][devmng] [drvManagerInit 2027] get container flag failed.[ERROR] DRV(514,yolov5):2022-12-20-09:15:53.288.478 [hdc_core.c:389][hdc] [hdcPcieInit 389] HDC init fail, driver may not load.[ERROR] DRV(514,yolov5):2022-12-20-09:16:03.297.199 [hdc_core.c:374][hdc] [hdc_phandle_get 374] HDC init, open pcie device fail. error : No such file or directory[ERROR] DRV(514,yolov5):2022-12-20-09:16:03.297.608 [devdrv_manager.c:100][devmng] [devdrv_open_device_manager 100] open device manager fail,name=/dev/davinci_manager,ret_fd=-1,old_fd=-1,err=2.[ERROR] DRV(514,yolov5):2022-12-20-09:16:03.297.684 [devdrv_manager.c:439][devmng] [drvGetPlatformInfo 439] open device error.[EVENT] PROFILING(514,yolov5):2022-12-20-09:16:03.367.948 [msprof_callback_impl.cpp:151] >>> (tid:514) Started to register profiling callbacks to acl[ERROR] DRV(514,yolov5):2022-12-20-09:16:03.426.286 [devdrv_manager.c:100][devmng] [devdrv_open_device_manager 100] open device manager fail,name=/dev/davinci_manager,ret_fd=-1,old_fd=-1,err=2.[ERROR] DRV(514,yolov5):2022-12-20-09:16:03.426.434 [devdrv_manager.c:439][devmng] [drvGetPlatformInfo 439] open device error.[ERROR] DRV(514,yolov5):2022-12-20-09:16:03.497.950 [devdrv_manager.c:100][devmng] [devdrv_open_device_manager 100] open device manager fail,name=/dev/davinci_manager,ret_fd=-1,old_fd=-1,err=2.[ERROR] DRV(514,yolov5):2022-12-20-09:16:03.498.109 [devdrv_manager.c:179][devmng] [drvCommonIoctl 179] open device manager failed, fd(-1).[ERROR] DRV(514,yolov5):2022-12-20-09:16:03.498.169 [devdrv_manager.c:700][devmng] [drvGetDevInfo 700] ioctl failed ret = 4.[ERROR] DRV(514,yolov5):2022-12-20-09:16:03.498.226 [devdrv_manager.c:783][devmng] [drvGetSystemInfo 783] drvGetDevInfo failed ret = 4.[ERROR] DRV(514,yolov5):2022-12-20-09:16:03.498.284 [devdrv_manager.c:1138][devmng] [halGetDeviceInfo 1138] halGetDeviceInfo failed ret = 4, moduleType = 0, infoType = 1.[ERROR] RUNTIME(514,yolov5):2022-12-20-09:16:03.498.371 [runtime.cc:626]514 InitSocType:[INIT][DEFAULT]Call halGetDeviceInfo failed: drvRetCode=4, module type=0, info type=1.[ERROR] RUNTIME(514,yolov5):2022-12-20-09:16:03.498.559 [runtime.cc:704]514 Init:[INIT][DEFAULT]Init SocType failed.[ERROR] RUNTIME(514,yolov5):2022-12-20-09:16:03.498.790 [api_c.cc:2330]514 rtGetSocVersion:[INIT][DEFAULT]ErrCode=507000, desc=[null instance pointer], InnerCode=0x70b0001[ERROR] ASCENDCL(514,yolov5):2022-12-20-09:16:03.498.881 [acl.cpp:167]514 InitSocVersion: [INIT][DEFAULT][Get][SocVersion]get soc version failed, runtime result is 507000[ERROR] ASCENDCL(514,yolov5):2022-12-20-09:16:03.498.984 [acl.cpp:100]514 aclInit: [INIT][DEFAULT][Init][Version]init soc version failed, ret = 507000WARNING: Logging before InitGoogleLogging() is written to STDERRE1220 09:16:03.499096 514 DeviceManager.cpp:54] Failed to initialize all devices: Error code unknown.E1220 09:16:03.499197 514 Yolov5Detection.cpp:78] Init devices failed, ret=507000.I1220 09:16:03.499222 514 main.cpp:121] Yolov5DetectionOpencv init failed, ret=507000.[EVENT] IDEDH(514,yolov5):2022-12-20-09:16:03.530.615 [adx_server_manager.cpp:27][tid:514]>>> start to deconstruct adx server manager[ERROR] DRV(514,yolov5):2022-12-20-09:16:03.583.571 [devdrv_manager.c:100][devmng] [devdrv_open_device_manager 100] open device manager fail,name=/dev/davinci_manager,ret_fd=-1,old_fd=-1,err=2.[ERROR] DRV(514,yolov5):2022-12-20-09:16:03.583.744 [devdrv_manager.c:439][devmng] [drvGetPlatformInfo 439] open device error.